Saturday, February 8, 2014

DIY Floor Mirror Frame (with oxidized wood finish)

I got a chop/miter saw for Christmas from my parents and put it to use making a frame for a mirror that I've had for a really long time. So long that the edges were chipping off a bit and needed some protection. After seeing some nice looking floor mirrors that were pretty expensive, I decided that I could make this old thing look way more expensive than it is for half the cost of buying new. Plus it gave me something to do during the polar vortex in Chiberia. This was a pretty easy project if you already have a few tools. I did end up having to buy a Kreg Mini Jig and a few other items to drill pocket holes. But it was a small investment for something that I can use for other projects in the future. And the Kreg is super fun to use. I love this thing!

Mirror Before - Boring!

Materials Needed:

  • Miter saw or hand saw
  • Wood for frame ( I used 1x8's because I wanted a grand look)
  • Kreg Mini Jig
  • Kreg Face Clamp
  • Kreg pocket hole screws (you need 1 1/4" for a 3/4" board)
  • Kreg square drill bits
  • Quick Clamps
  • 1/4" plywood (enough to cover back of mirror)
  • 1/4" x 2" strips of wood to act as the "frame" on the back of the frame to hold in your mirror
  • 3/4" wood screws
  • Vinegar
  • Steel Wool
  • Black Tea

Cut Your Boards

You can do whatever style you'd like, straight cuts and butt the boards up to each other or do 45 degree angles like I did. Just make sure to measure your mirror. Mine is 20" wide, so I wanted the opening of the frame to be 19" wide so the mirror could have 1/2" on each side to sit on the backside of the frame. Try fitting your boards together to make sure there are no glaring issues. I placed the matching pieces on top of each other to make sure they were the same size. You just never know if you're not a super skilled wood worker, you could have made a mistake somewhere. I actually cut my small boards a little too big the first time because my math was off, luckily it wasn't too small and I could just cut it down a little.  

Wood Oxidation 

  1. Take a handful of steel wool (0 to 000) and place in a jar and fill the jar with white vinegar. I found that not sealing it completely and letting air in helped speed up the process of the vinegar dissolving the steel wool. But this stinks in your house. Sit it outside or place in the garage.  
  2. Brew a bunch of tea bags in another jar. I threw like 8 into one jar and poured hot water over it and let it site for a while. 
  3. Paint a few coats of black tea on your boards, letting dry between coats. You won't really notice a huge change at this point. FYI if you decide to paint your tea on and then mess around with the vinegar because it's not looking like it's doing anything so you think poking your fingers in it and stirring a bit is a good idea, the skin around your finger nails are going to turn grey/black.
  4. Once your vinegar solution looks cloudy and a slight brown color, you can test and see if it's going to change to the color you want. The longer it dries, the darker it will get. I only put one coat of vinegar solution on the boards and you can see the change that happened.
  5. After this dried, I finished it with 4 coats of water-based polyurethane by Minwax. Sanding with an extra fine sanding sponge or flexible finishing pad between coats.
 
Painting on the Tea
Steel Wool in Vinegar and Black Tea Jars
After Painting on Vinegar/Steel Wool Solution

Frame Assembly

  1. Place your frame pieces face down on a surface that you have covered with towels or something soft to protect your finish. You could always finish after assembly, but I didn't have the space to keep a fully assembled frame out like that for a few days. 
  2. Drill your pocket holes in both sides of the long boards. With my 1x8's I was able to get 3 holes in. I probably could have gotten 4 and probably should have, but I wasn't thinking because I was excited. 
  3. Fit one end together by clamping your pieces together to a table and use a drill with your Kreg square drill bit to screw in your pocket hole screws. Keep going until you've got your frame assembled. 
  4. Measure a 1/2" in from the interior of your frame and mark it all around. Take your 2" wood strips and clamp them down one at a time at your half inch mark and use a small drill bit to pre-drill your holes to screw the strips to your board. Use 3/4" screws here. Finish adding all strips. Mark with a pencil on frame on the outside part of the strip where you have placed your screws so you know where you can place screws for the plywood backing in step 5.
  5. Place your mirror inside the space you just created. 
  6. Place your 1/4" plywood that you have cut to cover the back of the mirror and pre-drill for your 3/4" screws, then add your screws. 
  7. Boom! You're done! get some help picking this baby up or be careful moving it. I splintered the corner of my frame almost immediately. :( But thankfully it was easily masked.
Kreg Mini Jig - Pocket Hole Guide

Finished Frame :)

Mine ended up being 6' 9.5" tall and just shy of 34" wide. I spent about 100 bucks on wood, screws, the pocket jig set, clamp, and sanding sponge. I already had the mirror, poly, vinegar, tea, and steel wool. So not a bad investment for something that would cost upwards of 200 bucks for a cheap version and more like 400 for a nicer version which I think this one ends up looking like. If you don't want to oxidize the wood, you could do any finish that will match your existing decor. It's really up to you. I was thinking if you wanted a fancier look to this, you could get some crown moulding or other decorative moulding to build up a look you want. it would definitely make for an even more grand look and focal point of your room. If you're adding more bulk though, be sure you can move it where you want it after it's built. Mine feels like it's 50 pounds. I might have to take the back off the frame and remove the mirror when we move out of our 3rd floor condo. Yuck.

Finished Project
Finished Project

Tuesday, April 16, 2013

How to Replace the 12V Battery in a Toyota Prius

My Prius started acting funny. Sometimes when I would turn the car off after getting to my destination, it would beep like crazy when the keys and I would get out of the car. Even if I restarted it and turned it off again, it still wouldn't turn off properly. This would result in the 12v dying and needing a jump to get going again. Other times (like not overnight) it would just give me a weird Parking "P" error and tell me to park on flat ground. And frequently, I would get the dreaded red ! in a triangle. The first time you see that is not a good feeling. I went for about a month or so of gambling and 2 jump starts, I finally decided to test out the 12v to see how much power it has. Check out this thread to see how to get to the diagnostic screen without using your headlights. Mine was in the 9's which is no bueno.

I purchased an Optima from Amazon and a 12v battery charger. I wasn't sure if I would need to charge the battery or not, I did end up needing to charge it overnight, so it was a good investment.

What you'll need:

  • flat head screwdriver
  • a socket wrench
  • 7/16" or 11mm socket
  • 1/2" or 13mm socket
  • an extender for your socket wrench (I used a 10" because that's all I had, it was way too long to feel comfortable. Half that would be fine. Maybe even less than that). 
  1. Remove the trunk cover, hidden compartment, and corner cover over the battery. So you see:
  2. Remove the red cap. This is the hardest part of the process. I was able to pry the top so that it kind of bent it a bit, then pried up one of the side ones and worked it off.
  3. Remove the bolts shown below and swing the black box out
  4. Remove the negative line bolted to the car
  5. Remove the black box cluster from the top of the battery. Remove the black cap at the back of the cluster. Then loosen the clamp from around the positive battery lug (you don't need to unplug any wires). You can use a flat head to pry it just a bit, but be very careful of the lug. I was able to loosen mine, then slide the screwdriver underneath it and pry it off/up slowly, to remove the entire clamp/black cluster together. carefully set it out of the way being mindful of the wires
  6. Remove the black bracket holding the battery down
  7. Remove the tricky screw/bolt that holds the vent housing onto the side of the car and remove the vent housing off to the side
  8. Remove the hose attached to the side battery, be careful as you'll reuse this (see location in pic 1)
  9. Take out the battery
  10. Remove the clamp from the negative lug of the old battery and place it on the new battery. 
  11. Place your new battery in the hole and reverse the instructions

Side Notes

When I removed my battery, there was water in the battery well area. I was able to find a small crack near where the hatchback door hinges. As soon as I patch that up, it should fix the problem. A google search revealed that other people have the same crack in the same exact place.


My fuel gauge, even though full, only showed one bar under the E and just kept blinking. I drove around for a bit and it fixed itself, but you can see how to reset your fuel gauge if you're not so lucky. This is for 2G Prius.

Conclusion

I hope this guide helps any of you looking to replace your battery. I'm not sure if it's placebo effect, but my car seems less sluggish and so far, it seems like my gas mileage has improved!!

*disclaimer, I didn't take photos during this process so I have swiped some photos from other sources. But I did photoshop them for better instruction.

Tuesday, October 27, 2009

awesome vegetarian burritos

i got a little creative with my staple burrito meal a few weeks ago and thought i should share because most veggie burrito recipes are not very imaginative.

ingredients:
1 can black beans drained and rinsed
1 can dark red kidney beans drained and rinsed
a cup or so of corn (i use frozen (thawed) because i think it tastes better)
mushrooms, about 4-6 oz
spinach, a good amount, more than you would think because it cooks down maybe most of a bunch.
lettuce, enough for each burrito
green onions, use as much as you want
creole seasoning or taco seasoning to taste
cheese, i like tillamook's vintage white extra sharp cheddar
avocado or guac
tapatio or cholula
sour cream
garlic, just a bit for flavor
pine nuts


use a big saute pan, add the spinach, put a lid on it to steam and cook it down, when it starts getting soft, add sliced mushrooms and garlic, a little olive oil if you want. cook until mushrooms get soft. add both kinds of beans and thawed corn. warm, then add creole seasoning. warm tortillas, then put lettuce then cheese as a base, add the bean, spinach, mushroom, and corn mixture to the tortilla, then add as much of the remaining ingredients to the burritos as you want. you might want to get large tortillas, it's a lot to fit on there, but it's really tasty and much better than your standard burrito. hope you enjoy.

Friday, September 4, 2009

leaning toward fall

with the quarter sneaking up on me, i'm slowly getting back into school mode. i'll be interning through digital media outreach center at du with civic pixel. my main focus is going to be development with a bit of design on the side when needed. next week i get to learn how to write code for drupal, which is really exciting for me. i'm anxious to learn something that's valuable for my future career and also software that's open source and available for everyone. i think aside from the awesome experience this will give me resume wise, i'm most excited about being able to work with local nonprofit and not for profit organizations around denver. i think it will definitely give me a sense of pride to be able to make a difference here and there.

along with the internship, i'm taking a research methods class which is essentially the 'what the hell are you writing your thesis about' class. but i'm pretty sure i have the topic of mine locked down. i'm writing about how new social media is allowing people to be more civically and politically engaged. basically, things like facebook, myspace, twitter, and youtube are creating the ideal 'public sphere.' jurgen habermas' idea of a space in which citizens can gather without class divisions and discuss issues pertaining to their community.

Friday, May 8, 2009

Why I hate 'Chasing Amy'

This is a paper I wrote for Sociology of Human Sexuality a few years ago. I thought I would post it because several people have been shocked when I tell them I abhor Chasing Amy. So, now I can point you all here. Again, it was a paper with certain requirements so forgive the awkwardness at times.

Part I

Chasing Amy (1997) written and directed by Kevin Smith.

The main characters of the film are Holden McNeil (Ben Affleck), Banky Edwards (Jason Lee), and Alyssa Jones (Joey Lauren Adams). Holden, the main character, is a “normal” guy who co-creates a comic book with his long-time friend, Banky. Holden meets Alyssa, another comic book creator, through a mutual friend, support character, Hooper (Dwight Ewell), a gay black male. Holden develops a crush on Alyssa and difficulties ensue when he finds out she is a lesbian. Banky and Holden’s friendship becomes compromised because of Banky’s jealousy of Alyssa and his passive-aggressive homophobia, which is compensation for his latent homosexual tendencies and feelings for Holden. Holden and Alyssa fall in love despite Alyssa’s self-labeling of herself as a lesbian, but labels begin to blur when Holden realizes Alyssa has not always been a lesbian and has a more colorful past regarding sexual experiences than he can accept. Holden comes up with what he thinks is the perfect solution to heal his relationships with Banky and Alyssa after a conversation with Silent Bob (Kevin Smith) and Jay (Jason Mewes), his live inspiration for his comic book characters, Bluntman and Chronic. He suggests that he, Banky and Alyssa have sex together in order to address Banky’s homosexual tendencies, Holden’s feelings of inadequacy, and to try to build a bridge between Banky and Alyssa. His plan fails miserably.

Part II

Chasing Amy touches on several of the topics presented in class. The topics best represented are the question of what is “sex,” how the idea of what sex is defines a person’s virginity, sexual scripts and sexual identities/orientations.

After Holden discovers Alyssa is a lesbian, questions about the legitimacy of lesbian sex come up several times. The questions are directly asked of Alyssa and implied through the reactions of Holden and Banky. Banky and Alyssa have a conversation in a bar concerning what is and isn’t sex in their opinions. Banky balks at Alyssa’s reference to her having sex with a girl as “fucking.” Banky does not consider anything excluding penetration as “fucking.” For Banky, there must be a penis involved and if that is not possible, then a replacement such as a strap-on is essential. This male-centric point of view is not only homophobic it is also misogynistic. As long as there is a penis involved, it is sanctioned as sex. Two men having sex is better, in Banky’s opinion, because the penis is involved. He even says “all every woman wants, be it mother, senator, nun, is some serious deep-dickin’.” Later, Holden voices his opinion that it is natural for a man and a woman to be together and in his close-mindedness, causes Alyssa to defend lesbian sex as a legitimate form of sex; she explains lesbian sex by miming the sex movements she would use. Holden directly asks her is she is a virgin, because his definition of virgin is penile/vaginal penetration. This isn’t surprising for Holden’s character, when considering most people in American culture view virginity loss in the same way. In Lisa Remez’s article, “Oral Sex Among Adolescents: Is It Sex or Is It Abstinence?” Remez points out that “according to a fall 1999 survey conducted by Seventeen magazine in which 723 15-19 year-old males and females were approached in malls, 49% considered oral sex to be ‘not as big a deal as sexual intercourse,’ and 40% said it did not count as ‘sex.’ A summer 2000 Internet survey conducted by Twist magazine received 10,000 on-line responses from 13-19-year-old girls, 18% of whom said that oral sex was something that you did with your boyfriend before you are ready to have sex; the same proportion stated that oral sex was a substitute for intercourse” (p. 301). Penile/vaginal penetration is a socialized way of looking at virginity loss and definitions of sex. This is proved in Liahna E. Gordon’s essay, “The Social Constructionist’s “Essential” Guide to Sex.” Social constructionists found flaws in a particular study that asked about the frequency at which participants had sexual intercourse. “In particular, they questioned whether lesbians would read the question ‘how often do you have sex?’ in the same way as the other couples. In a culture that typically defines sex as penile-vaginal penetration, some women responding to this survey may not have thought the question applied to them, and thus under reported the frequency with which they were sexually intimate” (p. 34). The idea of virginity based on penile/vaginal penetration is underscored by Holden’s reaction to Alyssa’s sexuality. When he believes that she has only had sex with other women, the night they went out on a pseudo date she revealed to him that she had a casual sexual encounter the prior night and “fucked half the women of New York City,” he doesn’t mind, even jokes about it. But when he finds out that she has not only had sex with men, but also, “multiple sex partners at the same time,” he becomes angry to the point of ending the relationship over sexual acts that happened over 10 years prior to their relationship. Alyssa’s having sex with numerous women meant nothing to Holden because he did not view it as sex. To quote Hooper, “men need to think that they’re Marco-fucking-Polo when it comes to sex.” Holden’s fantasy of being the right man who has been able to lure her back from the dark side is shattered. His Madonna image of Alyssa is tainted and he is left with the “whore/dyke” part of the dichotomy mentioned by Crane and Crane-Seeber in “The Four Boxes of Gendered Sexuality: Good Girl/Bad Girl and Tough Guy/Sweet Guy” (p. 209). He tells Alyssa, “I want something we can’t be…a normal couple.” Because Holden sees Alyssa as more experienced then he is, he shuts her out and demeans her for her experience.

Although all of this thus far is offensive to me, I find that Smith’s portrayal of lesbians and the lesbian community takes the cake. First, Alyssa sends Holden mixed signals from their initial meeting. Granted, some people are naturally flirtatious, but by having Alyssa constantly flirt with Holden, Smith is subtly reinforcing the idea that lesbians are not truly lesbians. All lesbians, for Smith, are women who have not found the right man yet. After the scene in which Holden tells Alyssa that he loves her, she is upset and talks about her identity being at stake by allowing a romantic relationship with him. She is at odds with the label she has put on herself. This scene is unrealistic because if Alyssa were truly a lesbian, there would be no internal conflict. She would not be attracted to Holden sexually. The ridiculousness of this scene is climaxed by the lusty make-out session between the two. If Alyssa is the sexually fluid person she claims to be, leaving “doors open” in order to not shut out the person she is most compatible with, then why would she label herself as a lesbian? I think this part was put into the film purely to facilitate the male fantasy of “turning” a lesbian. I have always disliked this movie for the way it portrays the character of Alyssa. Smith makes Alyssa into a heterosexual male fantasy of what/who a lesbian is and offers no real depth to her life, making her a superficial character whose only function is to play off of Holden’s perceptions of her sexuality.I am unsure as to whether Smith intentionally makes Alyssa into an unrealistic character or if he was simply naïve and buying into the male fantasy of lesbians. In either case, the portrayal of Alyssa is short sighted and stereotypical in the worst way.

Part III

This film clearly shows the benefits of following society’s standards for what is considered sexually “normal.” When Holden finds out that Alyssa has had more sexual partners than he has and has had various sexual experimentations, she is punished. Holden tries to make her feel guilty for her actions, as though she is dirty or wrong for having experienced them. She refuses to apologize, which is one redeeming quality of the film. Another redeeming quality was the scene that touches on how lesbians are considered chic in our society, granted, because lesbians are a male fantasy and non-threatening, but gay males frighten most of society and are significantly less accepted. Unlike Alyssa, Hooper has to keep his sexuality hidden in order to advance his career and keep up the image of a strong black man. Smith tries, with Banky, to address passive aggressive homophobia by showing that Banky is really confused about his own sexual orientation and does not know how to address his feelings. It seems that Smith was trying to say that sexuality should be fluid, we should love people for who they are, not because of their genitalia. I believe one of the tag lines for the film is/was “it’s not who you love, but how.” It’s an admirable idea, but as discussed in class, certainly not something that will happen in our culture in the near future. I don’t think that Smith was intentionally trying to offend lesbians with his film; in fact, I think he was tying to make a decent political statement in some instances. He was just all over the place, and it seemed to have no real focus, no definite statement. I think he, like Holden, fails miserably in the end.